Influences of assembly pressure and flow channel size on performances of proton exchange membrane fuel cells based on a multi-model

In this work, assembly pressure and flow channel size on proton exchange membrane fuel cell performance are optimized by means of a multi-model. Based on stress-strain data of the SGL-22BB GDL obtained from its initial compression experiments, Young's modulus with different ranges of assembly pressure fits well through modeling. A mechanical model is established to analyze influences of assembly pressure on various gas diffusion layer parameters. Moreover, a CFD calculation model with different assembly pressures, channel width, and channel depth are established to calculate PEMFC performances. Furthermore, a BP neural network model is utilized to explore optimal combination of assembly pressure, channel width and channel depth. Finally, the CFD model is used to validate effect of size optimization on PEMFC performance. Results indicate that gap change of GDL below bipolar ribs is more remarkable than that below channels under action of the assembly pressure, making liquid water easily transported under high porosity, which is conducive to liquid water to the channels, reduces the accumulation of liquid water under the ribs, and enhances water removal in the PEMFC. Affected by the assembly force, change of GDL porosity affects its diffusion rate, permeability and other parameters, which is not conducive to mass transfer in GDL. Optimizing the depth and different dimensions through width of the flow field can effectively compensate for this effect. Therefore, the PEMFC performance can be enhanced through the comprehensive optimization of the assembly force, flow channel width and flow channel depth. The optimal parameter is obtained when assembly pressure, channel width and channel depth are set as 0.6 MPa, 0.8 mm, and 0.8 mm, respectively. The parameter optimization enhances the mass transfer, impedance, and electrochemical characteristics of PEMFC. Besides, it effectively enhances the quality transfer efficiency inside GDL, prevents flooding, and reduces concentration loss and ohmic loss.     

Fully coupled LES-DEM of particle interaction and agglomeration in a turbulent channel flow

Coupled large eddy simulation and the discrete element method are applied to study turbulent particle–laden flows, including particle dispersion and agglomeration, in a channel. The particle–particle interaction model is based on the Hertz–Mindlin approach with Johnson–Kendall–Roberts cohesion to allow the simulation of van der Waals forces in a dry air flow. The influence of different particle surface energies, and the impact of fluid turbulence, on agglomeration behaviour are investigated. The agglomeration rate is found to be strongly influenced by the particle surface energy, with a positive relationship observed between the two. Particle agglomeration is found to be enhanced in two separate regions within the channel. First, in the near-wall region due to the high particle concentration there driven by turbophoresis, and secondly in the buffer region where the high turbulence intensity enhances particle–particle interactions.     

Modeling and analysis of hierarchical cellular networks with bidirectional overflow and take-back strategies under generally distributed cell residence times

The rapid growth of wireless services and mobile users drives a great interest in cellular networks with a hierarchical structure. Hierarchical cellular networks (HCNs) can provide high system capacity, efficient channel utilization and inherent load-balancing capability. In this paper, we develop an analytical model and a performance analysis method for a two-layer HCN with bidirectional overflow and take-back strategies. Mobile users are divided into two classes. The call requests (including new and handoff calls) of fast and slow users are preferably assigned to the macrolayer and microlayer, respectively. A call from a fast user or slow user can overflow to its non-preferable layer if there is no channel available. The successful overflow call can be taken back to its preferable layer if a channel becomes available. Since the commonly used exponentially distributed assumption for cell residence time and then the channel occupancy time does not hold for emerging mobile networks, we model various cell residence times by general distributions to adapt to more flexible mobility environments. The channel occupancy times are derived in terms of the Laplace transforms of various cell residence times. The handoff rates, overflow rates and take-back rates of each layer are also derived in terms of the new call arrival rates and related probabilities. The stationary probabilities (and then the performance measures) are determined on the basis of the theory of multi-dimensional loss systems.     

浅谈提高信道效率的措施

提高信道的数据传输效率是人们不断追求的目标之一，也是衡量网络性能的标准之一，从几方面分析总结了为此而采取的各种措施。     

等径弯角挤压工艺(ECAEP)研究现状

等径弯角挤压是制备块状细晶材料的一种大塑性变形工艺，目前得到国内外高度重视．本文简要介绍了等径弯角挤压工艺的基本原理和变形特点，从理论上对其变形方式和机理进行了分析，并详细介绍了该工艺的应用领域。     

电信服务营销渠道转型的必要性

分析了电信企业服务营销渠道的特点、旧有的服务营销渠道模式和存在的问题以及今后电信业和市场等方面发展的新需求，对电信服务营销渠道转型的必要性进行了探讨和研究,同时提供了一个可供参考的服务营销渠道价值评估体系架构,从量化服务营销渠道对电信企业贡献价值的角度论述了服务营销渠道转型的必要性。     

Wavelet packet based channel equalization

Recently, considerable amount of attention is being given to the field of wavelets and wavelet packets. It has found numerous applications in signal representation, image compression and applied mathematics. In this paper, we present a channel equalization method based on wavelet packets. The proposed equalizer structure is based on the fact that for sufficiently narrowband sequences, a non-ideal channel can be modelled as an attenuation and delay. If the data sequence is used to modulate a set of narrowband wavelet packets, then no equalization is required at the receiver end. The equalization problem reduces to that of determining the delay introduced by the channel for each of the wavelet packets. A minimum square variance algorithm for adaptively choosing the delay has been proposed. This algorithm has been shown to perform as desired analytically in a simple delay channel case. Simulations have been used to study its performance in the non-ideal channel’s case and the results corroborate theoretical predictions.     

土壤固化剂在渠道防渗工程中的应用

土壤固化剂在渠道防渗工程中的应用在国内尚属首次，其主要工序为将土壤固化剂与土壤充分搅和形成固化土，采用专用砌块成型机将固化土制成砌块，用于渠道防渗，技术可靠、工程造价低，具有良好的性能价格比。     

无阈下信道签名方案及其应用

介绍了开展封闭阈下信道签名研究的意义，综述了它们新的研究成果和应用。最后提出了若干有待进一步研究的问题。     

一种数字解码卫星电视接收机的原理分析

分析了一种数字解码卫星电视接收机，该机能接收利用ＭＰＥＧ－２进行数据压缩，采用ＳＣＰＣ或ＭＣＰＣ方式上星的卫星电视信号，具有选单显示，断电现场保护等功能。并对该机进行了原理分析，对主要集成电路的基本原理也作了简介，并给出了软件的部分主要流程及功能分析。